Table of Contents
BEST IELTS Academic Reading Test 264
IELTS ACADEMIC READING TEST – PASSAGE – 3
IELTS ACADEMIC READING TEST
READING PASSAGE – 3
Hazard Management
In many industrial or manufacturing workplaces, managing hazards is essential for a successful health and safety system. Hazard management is an ongoing process that goes through five different stages, with each step becoming a stage on a tire hazard management plan. The first step is to identify potential hazards, remembering that hazards are classed as anything that could potentially cause harm not only to people but also to the organization.
To illustrate, an industrial accident can cause an injury to employees, but can also result in lost production, broken machinery and wasted resources for the company, In many cases, local and national government legislation has strict regulations concerning hazard identification, and in many industries, especially those perceived to be dangerous, severe penalties can be incurred by companies overlooking such hazard identification.
Having identified the potential hazards, the next step is to assess the hazard; that is, to consider to what extent they are significant. To a degree, this is a subjective aspect of risk management, as what may be seen by one person to be a significant issue can be seen by another to be an acceptable feature of a workplace. To allow for a degree of uniformity, in this stage, hazards are rated using risk assessment tables. These tablets work by assigning a point value to three areas.
IELTS Academic Reading Test
The first is the exposure score, which assesses how often people are exposed to the hazard. If this is a continuous risk which employees face all the time, the score will be high; if the exposure is very rare, the points given will be substantially lower, The score is then multiplied by the likelihood of this hazard causing an injury, ranging from ‘Definite’ (it happens all the time) down to ‘Unlikely’ (it hasn’t happened yet). This is referred to as the chance rating.
The sum of the first two scores is again multiplied by the effects score, which considers how serious any accident might be. This can be rated from 1 (requiring minor first aid) right up to multiple deaths (classed as a disaster ). All 3 scores then give the final risk assessment result. Generally, a result in excess of 100 points requires caution, but a result of 200 hundred or more is classed as a high priority.
Certain jobs are, for the most part, permanently gamer scores of over 200 (firefighting, for example) and in many cases, additional payments, informally known as ‘danger money’, are applied. The third step on the hazard management plan is to control hazards that have been identified. There are 3 stages to hazard control. The first aim is to eliminate the hazard – that is, to get rid of it altogether. This can be achieved by removing debris or unnecessary obstacles from the workplace.
IELTS Academic Reading Test
Often, however, this is not possible, so the next step is to isolate the hazard, to store it out of the way. For example, a cleaning company cannot completely eliminate hazardous chemicals, but they can keep these chemicals locked away until required. Isolating hazard is an ongoing process that requires companies to have very dear and enforced guidelines regarding the safe storage of potentially hazardous products. If the hazards cannot be isolated, then the aim must be to minimize the risk. This is achieved through staff training in safe handling techniques and best practices, as well as the provision of personal protection equipment (PPE). PPE commonly includes items such as gloves, overalls and footwear with steel reinforced areas.
The fourth and fifth steps on a hazard management plan are connected – to record and review’ the hazard. The recording is done in the hazard register, and this register is continually reviewed to ensure best practices are maintained. If a severe accident does occur in the workplace, it is the hazard register that investigators often first turn to, to see if the issue had previously been reported and if so what the company had done about the hazard. It is worth noting that since the more rigorous application of hazard management systems, workplace accidents have experienced a significant decline in many industries previously identified as ‘high risk’.
IELTS Academic Reading Test
Questions 30 -31
Answer the question below using NO MORE THAN THREE WORDS from the passage for each answer.
30. The 5 stages of the managing hazards are put together as what?
31. Damaged machinery and discarded resources are two examples of hazards to what?
IELTS Academic Reading Test
Questions 32 – 37
Complete the summary using NO MORE THAN TWO WORDS from Reading Passage 3 for each answer.
To mathematical calculate risk assessment, 32…………… stages need to be calculated. The exposure score consider the amount of time employees spend working near the hazard. The33…………….. then measures the probability of an accident, ranging from not likely to 34………………. . The results are then 35………….. by each other, and then again by the degree of seriousness of an accident. The highest ‘effect’ score is given when more than one person is killed (this is rated as a 36………………. ). When calculated, a result of 200 or more is considered 37………………. .
IELTS Academic Reading Test
Questions 38- 40
Complete the flowchart
Choose NO MORE THAN TWO WORDS from Reading Passage 3 for each answer.
STAGES OF HAZARD CONTROL
1 st step is to 38…………… if possible
Locate the hazard ( e.g.39…………….. it out of the way)
40……………….. hazard by wearing proactive clothing and following safety training.
IELTS Academic Reading Test
ANSWERS ARE BELOW
IELTS Academic Reading Test
ANSWER
30. Hazard management plan
31. The organisation
32. Three
33. Chances rating
34. Definite
35. Multiplied
36. Disaster
37. High priority
38. Eliminate
39. Store
40. Minimise
IELTS Academic Reading Test